Properties for robotic library slots

You can view information about a slot in the robotic library, and about any media that is in the slot.

See Viewing storage device properties.

Table: Properties for robotic library slots

Item

Description

Slot number

Displays the number of the slot.

Bar code

Displays the label obtained from a bar code reader. Bar code information only appears if the robotic library has a bar code reader and a bar code label is on the media.

Cleaning slot

Indicates if this slot has been defined as a cleaning slot.

See Defining a cleaning slot .

Media label

Displays the media label as one of the following:

  • A label that Backup Exec automatically assigns.

  • A label that the administrator assigns.

  • A pre-assigned bar code label.

You can edit the media label, which is limited to 32 characters. Editing the label changes the name of the media in the display, but does not write the new label to the media until an overwrite operation occurs. When you edit a media label, try to make it a concise identifier that will remain constant even when the media is reused. You should write this media label on a label fixed to the outside of the physical media.

Duplicate labels can be automatically generated. For example, reinstalling Backup Exec or bringing media from another Backup Exec installation could cause duplication in labels. Duplicate labels are allowed, but not recommended.

If a bar code is available, and a bar code-equipped device is used, then the media label automatically defaults to that bar code.

Description

Displays the original media label if the media is imported media.

You can edit the media description, which is limited to 128 characters, to make it a more descriptive label.

Media type

Displays the media type and subtype (if available). Click the button next to the field to change the media type or subtype.

Export pending

Displays Yes when a job runs that has an associated Export Media template to export this media.

See About export media templates.

Media set

Displays the name of the media set this media belongs to.

Media location

Displays the name of the device or vault where this media is located.

Creation date

Displays the date and time when the media was first entered into Backup Exec.

Allocated date

Displays the date and time when the media was added to a media set as a result of an overwrite operation.

Modified date

Displays the date and time when data was last written to the media.

Overwrite protection until

Displays the date and time after which the media can be overwritten.

Appendable until

Displays the date and time after which the media can no longer be appended to.

Supports HW encryption

Displays Yes if this media supports hardware encryption.

See About hardware encryption.

Properties for robotic library slots